LOTUS OVERSEAS & MARKETING
BIOLOGY LAB REQUIRMENTS
INSECT NET
Very beautiful collapsible design, light
weight, convenient to carry in bag. Fine synthetic netting
mounted on wire ring, gripped to handle by fly-nut removeable rod
and hand grip.
INSECT NET
Replaceable stout ring with fly nut grip. Bag of fine synthetic netting mounted on ring. Handle made of light C.P steel either folding type for convienience.
PLANKTON NET
Made of silk bolting net 875mm,long, net suspended by muslin reinforcement. Three braided lead attached to swivel front. Rear of bag with 50mm opening for glass vial collection of plankton.
ACQUATIC NET
Strongly built for sweeping up aquatic insects and as general utility aquatic net. Removable, rigid D shape frame 300mm across silk bolting mesh bag with end reinforced with metal ferrule and with a trong grip.
NOTE: Spare bag for above required to replace torn and old one can also be supplied at extra cost on request.
INSECT COLLECTING BAG
Made of best quality canvas having two side pockets for keeping bottles two front pockets for two bottles, 6 Glass Tubes, 6 Specimen Tubes Inner partition and adjustable strap. Supplied without accessories.
VASCULUIH
An oval shape metal case, painted outside
and blackend inside to prevent rusting with hinged door and
sliding catch with shoulder strap.
Dimensions: 325 x 160mm.
POOTER
For collecting flies, spiders and other small arthropods. Comprises glass specimen tube, 75 x 25mm height x diameter, with inlet and outlet tubes via a rubber stopper. Collecting tube has flared end and mouthpiece has a rubber tube connection. A gauze filter confines collected specimens to the tube.
SPECIMEN TUBES
Specimen tube transparent with poly cap.
| Type | Height | Diameter in mm. |
| A | 50 | 25 |
| B | 75 | 25 |
| C | 100 | 25 |
| D | 75 | 75 |
| E | 100 | 32 |
| F | 75 | 37 |
| G | 100 | 37 |
PETRI DISHES
With melted edges.
Diameter:
CAVITY SLIDES
Thickness 1.35mm, Size 75 x 25mm
Thickness 3mm, Size 75 x 56mm
SLIDE BOXES
Teak wood with hinged lid sunmica top. Slides are held in numbered slots and there is an index inside the lid. With wooden/AI/Plastic rails.
MICROSCOPE SLIDE FOLDER
To hold 20 slides in flat position. Wooden with file-type hinged and frame with 20 compartments of die-cut hardboard, serially numbered with velvet cushined bottom. Nicely Polished.
MICROSCOPE SLIDE TRAY ALUMINIUM
Aluminium, to hold 20 slides flat. Die-pressed anodized aluminium sheet, can be used in oven for drying the slides.
MICROSCOPE SLIDE CABINET
The cabinet is clad in laminated sheet.
Dustproof door with lock. The drawers are made of teakwood having
wood grooves each serially numbered, bottom lined with velvet,
provided with index card frame and puller knobs. Lever lock to
prevent drawer taken out accidently. An extra drawer with index
cards. Moisture proof lacquered finish.
| Type | Capacity | Drawers | Slides |
| A | 500 | 5 | 100 |
| B | 1000 | 10 | 100 |
| C | 2000 | 10 | 200 |
| D | 5000 | 25 | 200 |
| E | 10000 | 60 | 200 |
| F | 15000 | 60 | 250 |
MICROSCOPE SLIDE CABINET
A unique combination of storing the slides
in flat as well as vertical position. Clad in laminated sheet.
Concealed type lockable door. One half fitted with aluminium
trays of 20 slides each in flat position. The other half carries
drawer to hold slides in vertical position, all serially
numbered. With index card frame and puller knobs. Extra drawer
with index cards, lacqur finish.
| Type | Capacity | Flat | Vertical |
| A | 1000 | 400 | 600 |
| B | 1600 | 600 | 1000 |
| C | 2000 | 800 | 1200 |
INSECT SETTING BOX
Seasoned teakwood frame with finger joint
and plywood bottom and top. The inner top and bottom have 5 or
6mm papered corksheet for pinning. Fumigation Chamber perforated
for pesticide. Lacquer finish.
Sizes:
INSECT SETTING SHOWCASES
Seasoned teakwood frame with finger joints.
Plywood bottom. non-rattling glass in wooden frame top. Bottom
has thick papered cork-sheet for pinning. Fumigation chambers
perforated for pesticide, provided with two brass clips and index
card frame. Moisture proof lacquer finish.
Sizes:
INSECT SETTING SHOWCASE
Showcase are made of seasoned teakwood,
removable glass frame top. Bottom has 5 or 6mm thick papered
cork-sheet for pinning. Double walled provide fumigation chamber
perforated for pesticides provided with pullar brass knobs and
cardframe. Moisture proof lacquer finish.
Size: 562 x 500 x 75mm
INSECT
SPREADING BOARD Made of teakwood
covered with 5mm thick papered cork-sheet. Smoothly adjustable
groove from 0 to l2mm, chrome plated brass fittings. Nicely
polished.
Size: 350 x 112mm. Length x Width.
MICROSCOPE SLIDE
Plane slides 75 x 25mm with ground edges. Washed and cleaned ready for use, pack of 72 slides.
COVER GLASSES
Cover glasses No.l, correct thickness for microscope optics.
STAINING BOTTLE RACK
Polished hardwood for twelve 30 ml staining bottles.
STAINING JAR
Glass jar with moulded glass cover. Takes 10 slides 76 x 28 mm back to back.
CAVITY BLOCKS
Block form with cavity, complete with
coverglass.
(A) 60 x 60mm
(B) 40 x 40mm
SLIDE DISPENSER
Holds up to 70 slides, 76 x 26mm length x
width stacked inside the clear acrylic cover. Slides are
dispensed by tuming the knob on either side.
Dimensions Slide holder 75 x 35 x 70mm Width x
Depth x Height
Overall length from the base 140mm.
Base 100x120 mm Width x Depth.
LABELS, MICROSCOPE SLIDE
Self-adhesive and ruled, square, side 25mm pack of 100 labels.
DISSECTING TRAY
Disceting Dishes Aluminium. Made from
aluminium sheet with flenged edges complete with wax.
Bottom Length x Width x Depth.
DISSECTING TRAY ENAMELLED
Steel white enamelled inside and outside, rectangular with flanged edges. Complete with wax. Bottom Length x Width x Depth
OPTIVISOR (HEADBAND MAGNIFIER)
A headband magnifier which will greatly
facilitate fine or close work whilst leaving the hands completely
free. The headband is fully adjustable and the visor itself may
be swung upwards when not immediately required. Main structural
material is light weight aluminium sheet, the lenses themselves
being of ground and polished optical glass. May be worn over
normal spectacles.
Three versions are available as follows:
FlEXIBLE ARM MAGNIFIER
General purpose magnifier consisting of a
large biconvex lens mounted on a flexible arm. The heavy base
provides stability whilst the flexible arm and swivel lens mount
allow the lens to be used in any position or plane.
Lens focal length 250mm
Lens diameter 100mm
Magnification2X approx
Arm length 300 mm
PARALLEL ARM MAGNIFIER
l00mm diameter lens mounted on a stand which keeps the lens parallel to the work plane when it is slided between arms, Heavy cast base provides stability.
DISSECTING MICROSCOPE
A versatile instrument for fine dissection
work. The high eyepoint lens (either X10 or X20) is mounted on a
jointing arm allowing the whole stage area to be scanned. The
wide glass stage has two spring clips and a reversible sub-stage
mirror/opal face illuminator. Focusing is by a rack and pinion
mechanism and detachable rests on either side ot the stage
provide a steadying support for hands during fine dissection. All
metal construction. Supplied complete with X10 and X20 lenses in
a wooden cabinet.
Dimensions: Overall height 180mm. approx.
Stage 65 x 85mm
CORNEX DISSECTING MICROSCOPE
A robust traditional microscope constructed
from a solid block of wood. The sides are out away at a
convenient angle to form hand rests. A glass stage is provided,
illuminated from underneath by a mirror at 45o. The
lenses are carried on an arm which can be swung across the stage
plate so that objects at different positions can be examined. The
two Lenses supplied enable magnifications of X10 and X20
Dimenslons: Overall 240 x 95 x 70mm Length x
Width x Height
Stegs 80 x 50mm Length x Width
HAND MICROTOME ROUND (AS PER HARRIS)
A high quality hand microtome
RAZOR (for above)
A high quality carbon steel single edge razor with folding cover.
HAND MICROTOME
An excellent handy product.
ROCKING MICROTOME
A high quality rocking microtome.
ROTARY MICROTOME
It is of immense use for Medical
Institutions, Research Laboratories etc. and gives very good
results for cutting thin sections. It is mounted on a heavy cast
iron base to ensure rigidity and long life. The housing gives
maximum protection to the mechanism against dust and paraffin
waste etc. It is driven by handle which can be locked in
position. The cutting sections obtained by mechanically operated
crank can be adjusted in steps of 1u to 25u by means of a knurled
knob on the front of the instrument. The efficient ball and
socket clamp renders possible to interchange specimen clamp and
paraffin stage with a single motion. The instrument is equipped
with a rotating knife, honing plate, three object holders and
oil-can.
SPECIFICATIONS
Feed adjustment: 1-25 micron (in step of 1
micron).
Opening of object stage: 30x15mm
Overall height: 260mm
Size of case: 500 x 400 x 350mm
Weight: 30Kg approx.
ROTARY MICROTOME
A heavy base with hinged cover for
protecting the interior mechanism, and knife holder. With every
complete revolution of the drive wheel, the feed panel engage the
teeth of rachet wheel which advances the object holder through
cone and inclined plane machanism, tissue sections can be cut
down to even 1 micron. A safety device automatically disengages
the feed machanism at the end. Feed indicator is in front and
feed setting is at the back of Microtome which sets 1 to 50
micron. A razor 120mm made from High carbon steel and tested for
Micro structure is supplied with instrument. There is an
arrangement to tilt angle of the razor adjustable up to 30o
on a reference scale.
TECHNICAL FEATURES
Feed adjustment: 1-50 Micron (in step of 1
micro)
Total feed excursion: 28mm opening of object
clamp.
Hall and flange type: 37 x 25mm
Overall dimensions: 400 x 250 x 175mm
Weight: 25 Kg. approx.
MICRO PROJECTOR
Can be used to project on to
day light viewing head, conventional screen or down on to bench
as an aid to drawing.
Stand: Conventional microscope stand
inclinable through 90o focussed through rack and
pinion, coarse and fine focus controls, stage size 115 x 155mm
Optics: Triple nose piece with 5x,10x and 20x
objectives sub stage condensor with flip-over top lens element
for high power work. Screen diameter 230mm.
Illumination: 12V 100W quartz iodine lamp with
heat filter and colour filter to enable instrument to be used as
a microscope with transformer in base working on 220-240V AC
mains.
Email:
info@lotusoverseas.com